I met a issue with error shows(when deploy dpdk on redhat) :
sudo: x86_64-native-linuxapp-gcc/app/test: command not found
I am not sure what is the matter.
Now I cannot test dpdk, could you someone help me if you met this before.
There are some detailed information about my system below.
FYI.
Kernel version
3.10.0-693.11.1.el7.x86_64
[root@cnhzdhcp16557 usertools]# ./dpdk-setup.sh
Build x86_64-native-linuxapp-gcc
...
== Build app/test-crypto-perf
== Build app/test-eventdev
Build complete [x86_64-native-linuxapp-gcc]
Installation cannot run with T defined and DESTDIR undefined
Insert IGB UIO module
Unloading any existing DPDK UIO module
Loading DPDK UIO module
Insert VFIO module
Unloading any existing VFIO module
Loading VFIO module
chmod /dev/vfio
OK
Insert KNI module
Unloading any existing DPDK KNI module
Loading DPDK KNI module
Press enter to continue ...
Network devices using kernel driver
0000:00:19.0 'Ethernet Connection I217-V 153b' if=enp0s25 drv=e1000e unused=igb_uio Active
0000:02:00.0 'Centrino Advanced-N 6235 088e' if=wlo1 drv=iwlwifi unused=igb_uio
Huge page information
AnonHugePages: 98304 kB
HugePages_Total: 128
HugePages_Free: 128
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
Run test application ($RTE_TARGET/app/test)
Enter hex bitmask of cores to execute test app on
Example: to execute app on cores 0 to 7, enter 0xff
bitmask: f
Launching app
sudo: x86_64-native-linuxapp-gcc/app/test: command not found
Run testpmd application in interactive mode ($RTE_TARGET/app/testpmd)
Enter hex bitmask of cores to execute test app on
Example: to execute app on cores 0 to 7, enter 0xff
bitmask: f
Launching app
EAL: Detected 4 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: PCI device 0000:00:19.0 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:153b net_e1000_em
EAL: No probed ethernet devices
Interactive-mode selected
USER1: create a new mbuf pool : n=171456, size=2176,
socket=0
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate memory
Aucun commentaire:
Enregistrer un commentaire